High Quality API 600 Cast Steel Gate Valve Monaco Factory

High Quality API 600 Cast Steel Gate Valve Monaco Factory

INQUIRY DETAILS *

INQUIRY NOW
  • captcha

Product Detail

FAQ

Product Tags

"Quality first, Honesty as base, Sincere service and mutual profit" is our idea, in order to develop continuously and pursue the excellence. High Quality API 600 Cast Steel Gate Valve Monaco Factory, We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.We strongly believe that we can do better and better.


GMK gate valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar. The gate faces can form a wedge shape or they can be parallel. Typical gate valves should never be used for regulating flow, unless they are specifically designed for that purpose. On opening the gate valve, the flow path is enlarged in a highly nonlinear manner with respect to percent of opening.

Product Range

-Valvesize:

2”~48”(DN50-DN1200)

-Pressure:

ANSIClass150~2500(PN16-PN420)

-Temperature:
-196℃~ 500℃

-Body Materials:

Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel

-Trim (Disc/Stem):

Carbon Steel, Stainless Steel, Duplex Steel, Alloy Steel

Technical Specifications

-Design: ASME 16.34/ API 6D/ API 600/ BS 1414

-Face to Face: ASME B16.10

-End Flange: ASME B16.5, ASME B16.47

-BW End: ASME B16.25

-Test: API 598/ API 6D/ BS 6755

-Special: NACE MR-01-75

Design Features

-OS & Y, Rising stem

– Bolted Bonnet with spiral-would gasket

-Flexible Wedge

-Backseat Weld-Deposited

-Threaded or welded seat ring

-Renewable seat rings

-Extended Bonnet for Cryogenic Service

-Flanged or butt welded ends.

-By Pass on Request

-Locking Device Optional

  • Previous:
  • Next:
  • FAQ Content




  • SUBSCRIBE for FREE pool care and maintenance videos
    every week: http://bit.ly/SubscribeINYO ****

    VISIT our blog for weekly swimming pool tips, tricks, and more! http://www.inyopools.com/blog
    SHOP at our online store! http://bit.ly/InyoPools

    Listen to the Poolside Chat podcast!
    iTunes:http://bit.ly/PoolsideChat
    SoundCloud:https://soundcloud.com/inyopools-com

    LIKE us on FACEBOOK! https://www.facebook.com/inyopools
    FOLLOW us on TWITTER! https://twitter.com/inyopools
    FOLLOW us on INSTAGRAM! https://www.instagram.com/inyopools/
    JOIN our circle on GOOGLE+ https://plus.google.com/+Inyopools/posts

    When a system is fully primed, the system components, pipes, pump, filter etc., are filled with water and the pool pump is able to suck water from the pool and push it back into the pool through pool returns. Priming a pool pump involves purging air from the pumping system and filling the water lines and pump with water. The number of steps required to prime your pool pump depends on the amount on water in the suction side of the lines – water coming from the pool to the pump. If you are installing a new pool system, there is no water in the lines, and you may have to repeat these steps several times. If you are adding or replacing components into the pumping system (like a heater), there will still be some water in the lines and priming will be simpler. The following procedure assumes that you have no or little water in the system. Visible indications of low water are no or little water in the pump strainer box, and a low pressure reading on the pool filter pressure gage.

    f the pool pump is running, your first step is to turn off the power to the pool pump. For maximum safety turn off the power at the circuit breaker to the motor.

    The suction diverter valve allows you to shut off water from the skimmers or from the main drain. Generally you cannot shut off both. To prime the system in steps, move the diverter valve so that the off side of the lever is pointing to the main drain side. Now water can only flow from the pool skimmer lines. Note: if you are only adding a component to an existing system, water will still be in the lines and you can probably re-prime the system by opening the skimmer and main drain lines at the same time (lever is halfway between skimmers and main drains).

    Next you will have to relieve any pressure that remains in the pool pump and water lines. To relieve pressure turn the air relief valve on top of the pool filter counter clockwise. You will hear air releasing as you see the pressure on the pressure gauge go to 0 psi. Leave this relief valve open. READ MORE http://www.inyopools.com/HowToPage/how_to_prime_a_pool_pump.aspx



    metervalveandcontrol.com/ – Call Today – 877-566-3837

    We specialize in providing quick delivery of quality products serving the process measurement and control arena. Our engineers and product specialists work alongside engineers, utilities, contractors, resellers and the end user to quickly let them know what products best fit their application, budget and schedule constraints.

    If your project calls for gas or water measurement, regulation, safety devices or local and remote monitoring you have come to the right place. Meter, Valve and Control is standing by to help you select and purchase the best products that meet your specifications and budgetary concerns. We carry major brands that you know and have a track record of success. If we don’t have what you need in stock we know where to get it in with a quick turn around.

    We have excellent manufacturer and distributor relationships throughout the industry and continue to exceed your expectations for quality, support, quick deliveries and follow up. Our overall level of service from specification to sale and follow up support gives us a leg us on our competition. We aim to exceed your expectations so don’t hesitate to ask us to go the extra mile since our goal is to make your choice among competitors a simple one.

    Our products are well-built, durable, high quality and dependable. You might not have heard of us before but Once you’ve used our quality products and had a taste of our excellent service. We can guarantee that you won’t ever forget our name
    Meter, Valve and Control — Process Measurement and Control Solutions

    Call Today – 877-566-3837
    metervalveandcontrol.com/

    1499 Sunnybroook Road
    Alamo, California 94507

    We are a certified Woman Owned Business Enterprise.
    Please Subscribe To Our Channel For Updates and Information

    Related Products

    INQUIRY DETAILS *

    INQUIRY NOW
    • captcha