2016 High quality Extended Bonnet Cryogenic Gate Valve in Manila

2016 High quality Extended Bonnet Cryogenic Gate Valve in Manila

INQUIRY DETAILS *

INQUIRY NOW
  • captcha

Product Detail

FAQ

Product Tags

Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction. 2016 High quality Extended Bonnet Cryogenic Gate Valve in Manila, We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.


GMK gate valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar. The gate faces can form a wedge shape or they can be parallel. Typical gate valves should never be used for regulating flow, unless they are specifically designed for that purpose. On opening the gate valve, the flow path is enlarged in a highly nonlinear manner with respect to percent of opening.

Product Range

-Valvesize:

2”~48”(DN50-DN1200)

-Pressure:

ANSIClass150~2500(PN16-PN420)

-Temperature:
-196℃~ 500℃

-Body Materials:

Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel

-Trim (Disc/Stem):

Carbon Steel, Stainless Steel, Duplex Steel, Alloy Steel

Technical Specifications

-Design: ASME 16.34/ API 6D/ API 600/ BS 1414

-Face to Face: ASME B16.10

-End Flange: ASME B16.5, ASME B16.47

-BW End: ASME B16.25

-Test: API 598/ API 6D/ BS 6755

-Special: NACE MR-01-75

Design Features

-OS & Y, Rising stem

– Bolted Bonnet with spiral-would gasket

-Flexible Wedge

-Backseat Weld-Deposited

-Threaded or welded seat ring

-Renewable seat rings

-Extended Bonnet for Cryogenic Service

-Flanged or butt welded ends.

-By Pass on Request

-Locking Device Optional

  • Previous:
  • Next:
  • FAQ Content




  • The Ford C4 Transmission is prone to leaking around the shifter shafts. Larry Shirley and Jeff Ford give you tips and tricks for how to make a good repair, as well as places to get the parts you need to get the job done.

    Home page: http://www.autorestomod.com/ Rate, ask questions, we are very good about responding!

    Thanks for watching!
    Jeff Ford Contact:
    Jford@autorestomod.com

    Sponsor:

    http://www.nationalpartsdepot.com

    Tools:
    Basic Hand Tools

    Parts:
    C4 O-Ring (O/D) .650/ (I/D) .3810

    The shift linkage nut(inner) needs to be torqued to 12-16 ft lbs.

    The valve body bolts are torqued to 10 ft lbs.

    The pan gets torqued to 12-16 ft lbs. With the thinner than stock pan gaskets they are selling these days, I think 16 ft lbs is a bit much.



    http://www.maxbright.net

    Related Products

    INQUIRY DETAILS *

    INQUIRY NOW
    • captcha